notes

Your appliance needs repair?

Find Top Repair Technicians Near

search
Save upto 40% on your appliance repair cost

Electrolux Appliances

How do I reset my Electrolux refrigerator touch control panel?

Locate the removable panel at the interior top right corner of the fridge. Open the panel and you will find a red switch inside. Check whether the switch is on or off. If the switch is on then switch it off, wait for 15 sec and switch it back on. If the switch is off, switch it on. The Electrolux logo should appear on the touch control panel. If the Electrolux logo does not appear after 15 sec, repeat the step.

Why is my Electrolux refrigerator leaking?

If your Electrolux refrigerator is leaking water then you need to do the following:

  • Ensure proper cooling of the freezer.
  • Set the temperature of the refrigerator according to the weather conditions. For the summer season set the temperature to 5℃ ~ 6℃. For normal and winter weather set the temperature to optimal.
  • Keep a gap of 15cm between the body of the refrigerator and the wall.
  • Switch off the refrigerator for 4 hrs and clean the interiors
  • Why is my Electrolux refrigerator not cooling?

    If your Electrolux refrigerator is not cooling then try the following tips:

  • Deactivate all modes and reset the refrigerator to factory settings.
  • Set the correct temperature of the refrigerator according to the weather condition.
  • Improve food packaging. If you use a lot of plastic then it might be blocking the air circulation inside. Make holes in the plastic bags.
  • Don’t cover the refrigerator in any kind of cover.
  • Avoid opening and closing the refrigerator too often.
  • Keep the refrigerator in a dark area, away from the sunlight.
  • There should not be any gap between the door gasket and refrigerator body. If there is a gap then the door gasket has to be repaired.
  • How to defrost Electrolux refrigerator?

    If the layer of ice in your freezer has become too much then you need to defrost your refrigerator. Press the “DEF” button and the defrosting process will start automatically or rotate the knob to off position to manually defrost the refrigerator. You will need to switch on the refrigerator after defrosting by rotating the temperature control knob.

    How to unlock from Electrolux refrigerator control panel?

    Your Electrolux refrigerator can have three kinds of lock function: control lock, child lock, and dispenser lock. Locate the unlock button on the control panel and switch it off if required. After pressing the button, wait for 3 seconds. You will hear a chime after the 3 seconds to confirm the process completion.

    Why is my Electrolux refrigerator beeping?

    Few Electrolux refrigerators have door alarms and they beep if the doors are not closed properly. Make sure that the doors are closed properly if your refrigerator beeps. Clean the door gasket if required.

    Why is my Electrolux refrigerator humming?

    A humming or buzzing sound from your Electrolux refrigerator is quite normal. It is the sound of the compressor running. The noise should not last for more than seven seconds.

    Make Appointment
    Name
    Email
    Phone Number
    Zip Code
    Select Appliance

    How It Works

    phone

    Call an Expert

    Call and connect with the best appliance repair agency near you

    calendar

    Get a Free Quote

    Get a free quote within minutes for your required repair service

    settings

    Schedule Appointment

    Schedule the repair service at a convenient time